Skip to topic | Skip to bottom
TWiki
TWiki.WindowsInstallCookbookr1.4 - 03 Mar 2003 - 01:16 - PeterThoenytopic end

Start of topic | Skip to actions

Windows Install Cookbook

Introduction

This cookbook is intended to get you up and running with TWiki on Windows quickly, with as few problems as possible. The 'cookbook' approach is simply to restrict the many choices that someone installing TWiki must make, so that a reasonably well-defined procedure can be followed - new users can simply follow the steps, while experts can use this as more of a guideline. Please read TWiki:Codev.WindowsModPerlInstallCookbook in case you use mod_perl.

There is a huge volume of existing material on TWiki about installing on Windows, and I'm indebted to the many contributors for this - the aim of this cookbook is to synthesise the many tips into a recipe that works.

  • NOTE: This cookbook is probably incomplete (e.g. it doesn't cover authentication setup), but it has now been successfully tried out by a few people - it is quite accurate and should get you started if you follow the instructions. Please consider it beta quality, and provide feedback in TWiki:Codev.WindowsInstallCookbookComments.
  • NOTE: You will get the best results from following this cookbook exactly, using the same directories etc - however, if you really do need to vary things, it should be fairly obvious what to do.

-- RichardDonkin? - 24 Feb 2002

Recent updates

  • 30 Nov 2002 - added binutils to list of Cygwin packages, and added warning not to use Apache 2.0
  • 20 Nov 2002 - update to avoid TWiki:Support.InstallDigestSHA1Fails when installing Digest::SHA1 on Windows 2000
  • 12 Nov 2002 - setting SMTPMAILHOST for user registration and notification
  • 03 Sep 2002 - linked to TWiki:Codev.WindowsModPerlInstallCookbook
  • 20 Jul 2002 - added flags to grep commands in TWiki.cfg
  • 27 Jun 2002 - more updates to list of required Cygwin packages
  • 20 Jun 2002 - added creation of c:/twiki directory
  • 17 Jun 2002 - updates to list of required Cygwin packages
  • 15 Jun 2002 - various notes on Cygwin installation and troubleshooting: use of 'Unix' as default text file type (i.e. for mounting c:/cygwin directories) is essential for binary attachment uploads to work properly
  • 27 Apr 2002 - update to settings for egrep and fgrep on some Cygwin versions (fix from TWiki:Main.DavidLeBlanc)
  • 21 Apr 2002 - updates on download sizes and free disk space requirements, improved post-installation testing, and brief coverage of TWiki:Codev.WindowsInstallModNTLM to avoid TWiki:Codev.ForgettingPasswords
  • 18 Apr 2002 - updates on Apache installation, setting TZ variable, and creation of c:\temp, based on comments by TWiki:Main.MaryDeMarco
  • 3 Apr 2002 - added pcre to list of Cygwin packages (required by grep), fixed bug in Apache config (Apache doesn't allow '#' comments on same line as config)
  • 19 Mar 2002 - comment about Windows 98
  • 18 Mar 2002 - fix for register script committed to TWiki:Codev.TWikiAlphaRelease - most users can ignore this for now, but the edits in step 5 will eventually go away
  • 14 Mar 2002 - minor fix to section on Apache environment
  • 13 Mar 2002 - added a link to another Windows text editor
  • 4 Mar 2002 - changed status to beta, notes about using spaces in file names, pointer on TWiki authentication setup, overview of Cygwin permissions and security issues
  • 3 Mar 2002 - minor update to include uname -a command to check Cygwin DLL version, and delete Apache config's PassEnv line
  • 27 Feb 2002 - various improvements to Cygwin and Perl Net::SMTP installation sections, based on comments in TWiki:Codev.WindowsInstallCookbookComments by TWiki:Main.MartinWittmann. Also linked to a Windows editor that understands Unix/Cygwin file formats.
  • 25 Feb 2002 - clarified changes required to register, fixed minor typo in Cygwin binary mode section, after beta testing by TWiki:Main.JerryWard (thanks!)

Scope

This document covers installation of the TWiki 01-Feb-2003 production release (TWiki:Codev/TWikiRelease01Feb2003) in the following environment - if you want to use a different environment, feel free to use this as a guideline only. (It has been mainly tested with the TWiki 01-Dec-2001 release but should work fine with Feb 2003.)

Component Name, version Comment
Operating System Windows 2000 Should also work for Windows NT
Web Server Apache 1.3.26 Windows-specific security holes fixed in this build
(check latest version at http://httpd.apache.org, but don't use Apache 2.0 yet)
Unix tools Cygwin 1.3.9 Simplest way to get a whole set of required tools
Perl Cygwin perl-5.6.1-2 Comes with Cygwin
RCS Cygwin rcs-5.7-2 Comes with Cygwin, includes a file corruption bugfix

Why this choice of packages? Because I've tried them, and they work well, without requiring a complicated setup... In particular, Apache is the commonest choice for TWiki on Unix/Linux, Cygwin Perl is very close to Unix Perl, and the Cygwin RCS is regularly updated, with a recent TWiki-relevant bug fix in Feb 2002. Cygwin also lets you install the Unix tools, Perl and RCS in a single step, saving quite a lot of time.

More recent minor versions should be OK, but they can introduce bugs.

NEW Major version upgrades, such as Apache 2.0 and Perl 5.8, are very likely to cause problems - for example, Apache 2.0 is unable to authenticate (see TWiki:Support.FailedAuthenticationWithApache2OnWinNT) users created by the current TWiki user registration script (due to a feature being removed in 2.0), and Perl 5.8 may introduce issues due to its Unicode features. Even though the Apache group says that Apache 2.0 is the best version, that's not true for TWiki.

Alternatives

There are doubtless other combinations of components that may work - in particular:

Covering the whole range of additional possibilities, particularly web servers, would make this cookbook too complex, and is best handled as a separate activity.

Checking versions

If you already have some of these add-ons installed, here's how to check the versions - this assumes you have TWiki:Codev.CygWin already installed:

   $ : Cygwin DLL version is the number in 1.3.x format
   $ uname -r
   $ less c:/your-apache-dir/Announcement
   $ perl -v
   $ rcs -V

If you have an older version of any component, do yourself a favour and upgrade it as part of the install process.

Pre-requisites and upgrades

You will need to have local administrator rights and to be comfortable with Windows administration.

This cookbook is intended for a clean install, i.e. none of these components are already installed. However, since Cygwin and Apache's installation process is fairly upgrade-friendly, upgrades should work as well - take backups of all your data and config files first, though!

Text editing

Editing Cygwin files is best done with an editor that can handle Unix file format (see the Cygwin binary mode section below) - the installation process includes nano, a non-GUI editor, but if you prefer to use a GUI editor, you should first install PFE, a freeware editor that supports Unix format files. PFE is available on download.com and Simtel.

Another good TWiki:Codev.OpenSource editor is SciTE (aka WSciTE), available at http://www.scintilla.org/SciTE.html.

The Unix/Windows Environment

It's a little known fact that you can use pathnames such as c:/apache almost everywhere in Windows - try it in a File Open dialogue box. The main exception is the Win2000 cmd.exe command line shell - here, you must use double quotes around forward slashes, e.g. dir "c:/apache" will work fine.

The reason this matters is that '\' is a special character to Perl and other tools, so it's much easier to use '/' everywhere.

The Cygwin environment

TWiki:Codev.CygWin is a Unix-like environment for Windows - many of its tools support the c:/apache format, but it also provides a more Unixlike syntax, e.g. /usr/bin/rcs.exe, because some Unix tools ported onto Cygwin only support the Unix format.

When you launch a Cygwin shell, your existing PATH variable is translated from the Windows format to the Unix format, and the ';' separators in the Windows PATH are changed into ':' separators as required by Unix. A Cygwin tool (e.g. Cygwin Perl or Cygwin RCS) will always use the Unix PATH format, and will accept Unix format pathnames.

The Apache environment

Apache runs as a native Windows process and has nothing to do with Cygwin (at least the version used in this cookbook doesn't). Hence it supports c:/ pathnames in its config files and the first line of Perl CGI scripts.

If you need to use spaces in file names (not recommended), put double quotes around the file name in the httpd.conf file. There have been some security-related bugs in Apache with long pathnames, which are a bit more likely if you use spaces, so it's best to just avoid long names and using spaces.

The Perl environment

Once Perl has been launched by Apache, it is in Cygwin mode, and so is everything it launches, including ls, egrep, and RCS tools that it (typically) launches with the bash shell.

If you need to use spaces in file names (not recommended), you may be able to put double quotes around the file name in the TWiki.cfg file - however, it's not clear whether all the TWiki code would work with this.

Installing Components

Enough background, let's get on with the installation.

TWiki (part 1)

Head to http://twiki.org, click the download link, and fill in the form to request a URL for download. You'll get an automated email, which should arrive by the time you need it.

Apache

1. Download Apache

  • Check at http://httpd.apache.org/ for any security announcements
  • Check the latest 1.3.x version number on this page
  • Find a local mirror using http://www.apache.org/dyn/closer.cgi - choose httpd, then binaries, then win32
  • The file to download is apache_1.3.X-win32-x86-no_src.msi where 'X' is 20 or higher
    • Note that this is a Microsoft Installer format file (.MSI) - this is supported by Windows 2000.

  • NOTE: If you are using Windows NT, download the .MSI installer (instmsi.exe) from the Apache Win32 download page - this enables you to install .MSI files. You may need to update the .MSI Installer if you have an old version under NT.
  • NOTE: The Apache package itself requires a download of around 2 MB, and up to 10 MB of free disk space once installed.

2. Install Apache

  • Double-click the .MSI file to run the installer
  • Specify c:\ as the installation directory - this actually installs Apache into c:\apache (if you specify c:\apache, it installs into c:\apache\Apache). Putting Apache into c:\Program Files is not recommended for easy editing of Apache config files from Cygwin.
  • You can choose to run Apache as a Win2000 service or as a normal program - see the Apache docs for details.

3. Test Apache

  • If necessary, start apache, either as a Win2000 service (using Admin Tools | Computer Management, or by typing apache -k start -n apache) or standalone (by typing apache -k start)
  • Point your browser at http://yourdomain.com/ to see the Apache intro page.

Congratulations, you now have a working web server!

To restart Apache after changing its config, type:

  • apache -k restart for standalone Apache process running in another window
  • apache -k restart -n apache for Apache running as a Win2000 service (-n gives name of service)

Another useful command is apache -k stop.

Cygwin, Unix tools, Perl and RCS

4. Install Cygwin

Head to http://cygwin.com, and click the Install Cygwin Now link. Save the setup.exe in a directory, e.g. c:\download\cygwin-dist.

Now run the Cygwin setup.exe file - this will also install Perl and RCS in one fell swoop.

  • Choose Internet install
  • On first page, accept the defaults (be sure that the default text file type is Unix to avoid problems with attachment uploads, and specify 'install for all users')
  • Select c:\download\cygwin-dist as the local package directory, and suitable proxy settings, then pick a local mirror site
  • In the package list screen, hit the View button until you get an alphabetical list that says Full to the right of the button.
  • Leave the radio button on Curr (Current)
    • The Current column shows what's installed on your system (if anything)
  • For each package, make sure the New column in the installer has a version number under it. If it says 'Skip' or 'Keep' (meaning it's already installed), single-click that word until a version number is shown. Make sure you select the following packages:
    • bash
    • binutils
    • diffutils
    • gcc
    • grep
    • gzip
    • make
    • nano
    • ncftp
    • pcre
    • perl (5.6.1-2 or higher)
    • rcs (5.7-2 or higher)
    • tar
    • textutils
    • unzip
    • w32api
    • wget (optional, useful for Perl install and TWiki:Codev.ReadWriteOfflineWiki)
    • NOTE: Do not include lynx if you are upgrading from an older Cygwin installation (to avoid annoying DLL messages) - if you want Lynx, read the Cygwin FAQ entry and upgrade libncurses5.
  • Hit Next to do the installation.
    • NOTE: The mandatory packages require a download of about 12 MB - about half of this is Perl, which would be necessary even without Cygwin, and most of the rest is gcc, which is required for simple installation of Perl modules that use the C language. Something like 20 to 30 MB of free disk space should be enough for Cygwin, but I didn't test this (try a du -k / after a new install and let me know the last figure).
    • NOTE: The installer keeps a local copy of downloaded files, so it's easy to re-install without re-downloading.
  • Let the installer create the shortcuts suggested

5. Test Cygwin

  • Launch the desktop icon - this runs the bash shell, which has command line editing features
    • Use the cursor up key to recall previous commands - normal PC editing keys can then be used to edit a command
    • TIP: When typing a directory or file name, hit the TAB key after the first few letters of the name - bash will 'complete' the name. If bash beeps at you, hit TAB again to see the files/directories that match the name so far, and type a bit more before hitting TAB. This saves a lot of time!
  • Type rcs -V - you should see the RCS version, 5.7
  • Type perl -v - you should see cygwin mentioned in the first line, and the Perl version, 5.6.1
  • Type grep home /etc/passwd - you should see some output.

The Cygwin User Guide is well worth reading for some background on how Cygwin works.

6. Configure Cygwin for binary mode

  • This is very important - omitting this step leads to a partially working system that corrupts RCS files - without this, Cygwin tools (including Perl and RCS) will add unwanted carriage returns (Ctrl/M, '\r') to files in an attempt to translate between the Windows and Unix text file formats (Unix text files only use line feeds ('\n').
  • Stay in the Cygwin (bash) shell, and type the following (use only forward slashes, i.e. '/'):
   $ mkdir /twiki /c c:/twiki
   $ mount -b -s c:/twiki /twiki
   $ mount -b -s c:/ /c
   $ mount -b -c /cygdrive
   $ mount
   Device              Directory           Type         Flags
   C:\cygwin\bin       /usr/bin            system       binmode
   C:\cygwin\lib       /usr/lib            system       binmode
   C:\cygwin           /                   system       binmode
   c:\twiki            /twiki              system       binmode
   c:                  /c                  system       binmode
  • This configures /twiki (known as a 'mount point') to map onto c:/twiki and for that directory tree to always be in binary mode, and does the same for /c, mapping it onto c:/. The last-but-one command sets binary as the default for any unmounted drives (e.g. z:/, aka /cygdrive/z).
  • It is very important that all lines in the output of mount say 'binmode' under Flags
    • If the lines for C:\cygwin directories do not, you should uninstall and then re-install Cygwin to ensure that binary attachment uploads will work.
  • You can now refer to files using Unix paths, e.g. /twiki/bin/view or /c/apache/Announcement - see the Cygwin documentation for more details on this.
  • Now test this, still using the Cygwin shell:
    • Type cd /twiki
    • Type echo hi >t
    • Type cat -v t - you should see hi as the output
    • If you see filename errors, your mounts did not work for some reason - check your typing
    • If you see hi^M as output, your /twiki directory is not in binary mode
    • Clean up by doing rm t

This setup is written to the Windows registry, so there's no need to put these commands into a .profile file. For more information on binary vs text mode, see this User Guide section and this FAQ entry.

TWiki (part 2)

7. Download TWiki

Download the latest TWiki release from the URL that PeterThoeny sent you, and save it in the c:/twiki directory.

8. Install TWiki

Unzip the ZIP file under c:/twiki using WinZip, or by going into Cygwin and doing the following - you can hit the TAB key to complete filenames after you've typed the first part:

   $ cd /twiki
   $ unzip TWiki20011201.zip

Configuring components

Now that all the components are installed, you need to configure them.

Configuring Apache

The setup given here is fairly simple, in that it allows only TWiki to be served by the web server. For more complex setups, you can investigate the Alias and ScriptAlias commands that are left commented out in this configuration.

  • NOTE: This needs reviewing for security holes and to ensure nothing is missed, though this config does work.

1. Configure Apache (part 1)

Using a suitable text editor (e.g. Cygwin's 'nano', or the Windows PFE editor, unless you already know 'vi'), edit c:/apache/conf/httpd.conf as follows - this tells Apache where TWiki lives, and removes the need to tinker with the Windows 2000 environment settings.

  • If you are using nano, always launch it with nano -w filename - this turns off wrapping of long lines.
  • Note the trailing '/' characters in various places - they are important!

  • Create the c:\temp directory, by typing mkdir c:\temp in a DOS command line window
  • Edit the following lines, some of which already exist in the file:

# Change this to point to the Apache administrator (e.g. you)
ServerAdmin you@yourdomain.com

# Replaces DocumentRoot "C:/apache/htdocs"
DocumentRoot "C:/twiki"

# Replaces <Directory "C:/apache/htdocs">
<Directory "C:/twiki">

  • Add the following lines - the Alias and ScriptAlias lines can be omitted in this setup

# Alias /twiki/ "C:/twiki/"
# ScriptAlias /twiki/bin/ "C:/twiki/bin/"
<Directory  "C:/twiki/bin/">
    # RD: Changed None to All in next line, to enable .htaccess
    AllowOverride All
    Allow From All
    Options  ExecCGI
    SetHandler cgi-script
</Directory>

# Environment setup required to run Apache as service or as a
# standalone process.
<IfModule mod_env.c>
   # Adjust TZ for your server timezone, e.g. EST5EDT - put the non-daylight-savings
   # timezone code first (e.g. EST or GMT), followed by the number of hours that it's behind GMT 
   # during non-daylight-savings time (use '-5' for timezones in advance of GMT).
   SetEnv TZ GMT0BST
   SetEnv RCSINIT -x,v/
   # Adjust TEMP and TMP for your server and create directories if necessary
   SetEnv TEMP c:/temp
   SetEnv TMP c:/temp
   SetEnv LOGNAME system
   SetEnv HOME c:/twiki
</IfModule>

2. Configure Apache (part 2)

Add an AddHandler line to the <IfModule mod_mime.c> section of httpd.conf - this removes the need to rename all the TWiki CGI scripts later in the installation.

  • Note the trailing '.' on the AddHandler line.
#
# Document types
#
<IfModule mod_mime.c>
    # TWiki setup - avoid renaming scripts
    AddHandler cgi-script .
</IfModule>

Configuring TWiki

3. Configure TWiki

Edit the TWiki config file, c:/twiki/lib/TWiki.cfg (or in Cygwin terms, /twiki/lib/TWiki.cfg) as follows:

  • NOTE: It should be possible to use c:/twiki format pathnames for Cygwin, given the above binmode setup, but I have not tested this fully - a Cygwin Perl test script does generate binary mode files in this configuration, so it should work with RCS as well (really need a small RCS file corruption test case). Watch out for RCS file corruption carefully if you do try c:/twiki pathnames with Cygwin, and do report your experiences...
  • NOTE: Some recent versions of Cygwin (e.g. 1.3.10) seem to create 'symbolic links' from fgrep and egrep to grep, requiring the settings for these commands to point directly to grep (with suitable flags to provide fgrep and egrep behaviour).

# variables that need to be changed when installing on a new server:
# ==================================================================
#                   http://uai.cs.ubc.ca/twiki : link of TWiki icon in upper left corner :
$wikiHomeUrl      = "http://yourdomain.com/bin/view";
#                   Host of TWiki URL :    (Example "http://myhost.com:123")
$defaultUrlHost   = "http://yourdomain.com";
#                   /cgi-bin/twiki : cgi-bin path of TWiki URL:
$scriptUrlPath    = "/bin";
#                   /twiki/pub : Public data path of TWiki URL (root of attachments) :
$pubUrlPath       = "/pub";

# NOTE: Next three settings should be valid absolute pathnames using Cygwin; if using
# TWiki:Codev.ActiveState Perl, use z:/twiki format pathnames if your TWiki directory is not on C:.

#                   Public data directory, must match $pubUrlPath :
$pubDir           = "/twiki/pub";
#                   Template directory :
$templateDir      = "/twiki/templates";
#                   Data (topic files) root directory :
$dataDir          = "/twiki/data";

....

#                   Set ENV{'PATH'} explicitly for taint checks ( #!perl -T option ) :
#                   (Note: PATH environment variable is not changed if set to "")

# On Windows, $safeEnvPath needs only one component, the directory where RCS is installed
# - used by 'rcsdiff' to run 'co' program, so PATH must be correct.

# Unix/Linux setting:
# $safeEnvPath      = "/bin:/usr/bin";

# Using Cygwin perl, so can use Unix-like paths, with ':' as separator.
# Note that /usr/bin and /bin are identical due to default /usr/bin mount
# in Cygwin.  Must NOT use 'c:/foo' type paths, as ':' is taken as separator
# meaning that 'c' is interpreted as a pathname, giving Perl taint error.
$safeEnvPath      = "/bin";

# If using ActiveState perl, use Windows paths instead
# $safeEnvPath      = "c:/cygwin/bin";

...

#                   RCS directory (find out by 'which rcs') :
$rcsDir           = "c:/cygwin/bin";

...

#                   Unix egrep command :
$egrepCmd         = "/bin/grep -E";
#                   Unix fgrep command :
$fgrepCmd         = "/bin/grep -F";

For the cookbook install using Cygwin Perl, there's no more TWiki.cfg editing to be done, so you can get onto the next section.

#                   NOTE: When using ActiveState Perl, you must specify
#                   a full Windows-style pathname, using '\\' for backslashes,
#                   for the ls, egrep and fgrep commands, because Cygwin's shell
#                   is not used - forward slashes are OK in Windows everywhere
#                   except in the cmd.exe shell. Drive letters are OK - e.g.
#                   'c:\\foo\\ls' will work.  When using Cygwin perl, just
#                   use the default '/bin/ls' type settings.
#
#                   Unix ls command :
$lsCmd            = "c:\\cygwin\\bin\\ls";
#                   Unix egrep command :
$egrepCmd         = "c:\\cygwin\\bin\\grep";
#                   Unix fgrep command :
$fgrepCmd         = "c:\\cygwin\\bin\\grep";

Editing the CGI scripts

4. Editing the Shebang lines

Now to edit the curiously named 'shebang lines' at the top of the TWiki CGI scripts...

  • You must use the Cygwin shell to do this (unless you are a Perl expert) - don't use the Windows command shell, cmd.exe (aka DOS Prompt)
  • Then do the following, which quickly edits the 19 or so files, using Perl - the important lines are in bold.
  • Type the Perl line very carefully
    • If you do mis-type the perl line, you can restore from the .backup directory and re-run the command, as it will only edit the original files, not the backups with '~' suffixes.

$ cd /twiki/bin

$ ls
attach   geturl         oops     rdiff     save        testenv  viewfile
changes  installpasswd  passwd   register  search      upload
edit     mailnotify     preview  rename    statistics  view

$ mkdir .backup 
$ cp * .backup

$ head -1 view
#!/usr/bin/perl -wT

$ perl -pi~ -e 's;#!/usr/bin/perl;#!c:/cygwin/bin/perl;' *[a-z]

$ head -1 view
#!c:/cygwin/bin/perl -wT

$ ls
attach    geturl          oops      rdiff      save         testenv   viewfile~
attach~   geturl~         oops~     rdiff~     save~        testenv~  view~
changes   installpasswd   passwd    register   search       upload
changes~  installpasswd~  passwd~   register~  search~      upload~
edit      mailnotify      preview   rename     statistics   view
edit~     mailnotify~     preview~  rename~    statistics~  viewfile

If for some reason the edit goes wrong, just type cp .backup/* . (while within the bin directory) to restore the original distribution files. Use ls -a to see the .backup directory, and ls -a .backup to view its contents.

Optional step: you can do 'rm *~' to clean out the backups made by Perl, but that's not essential as all the original files cannot be executed. If you do this, type the command very carefully, as a space after the '*' will wipe out all files in this directory!

5. Minor changes to TWiki scripts

TWiki Dec 2001 release only - fixed in Feb 2003 release

If using the Dec 2001 release, you now need to make some minor edits to files in the c:/twiki/bin directory, using a suitable editor (remember to use nano -w filename if you prefer nano to vi - or just use the Windows PFE editor).

  • Edit the register script in /twiki/bin - change line 200 to read as follows (insert the MIME::Base64:: part):

         return $user . ':{SHA}' . MIME::Base64::encode_base64(Digest::SHA1::sha1($passwd));

Perl module installation

6. Installing required Perl modules

Some additional Perl modules are needed for the register script to work properly. Fortunately, there is an automated tool that makes it easy to do this - it's called cpan, and goes to the Perl module archive site, http://www.cpan.org/, to download all required modules, and then build and install them. Here's what you need to do:

First of all, you need to get the cpan tool configured and working - this is only necessary once. From the Cygwin shell, type the following (putting the export command in ~/.profile is recommended to make this setting persistent). Without the TEMP variable, some modules may fail to install on Windows 2000 and higher.

$ export TEMP=/c/temp
$ cpan
Lots of questions about configuration and preferences - just hit Enter until you 
get to the questions about mirror sites, but answer the questions about FTP proxies etc
 if you are behind a proxy-based firewall.  The CPAN tool will fetch a series of files, 
some quite large, as part of this setup process, so be patient...

NOTE: If you are behind a non-proxy-based firewall that requires the use of passive FTP, the initial downloads of files using Net::FTP may appear to hang - just wait 5 or more minutes, however, and the CPAN tool should eventually hit on ncftpget, which is part of Cygwin and does work OK. If this doesn't work and you are behind a typical NAT-based firewall, try doing the following at the Cygwin shell before running cpan - this forces Net::FTP to use passive FTP, letting it get through such firewalls:

$ export FTP_PASSIVE=1
If this works, add this line to your ~/.profile file for future use.

Once some initial files are downloaded, you are asked to select your continent and country, and then mirror sites - just type the number of the mirror sites you want to use (pick a few in case one is down):

...
(28) Turkey
(29) Ukraine
(30) United Kingdom

Select your country (or several nearby countries) [] 30

(1) ftp://cpan.teleglobe.net/pub/CPAN
(2) ftp://ftp.clockerz.net/pub/CPAN/
(3) ftp://ftp.demon.co.uk/pub/CPAN/
(4) ftp://ftp.flirble.org/pub/languages/perl/CPAN/
(5) ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/
(6) ftp://ftp.plig.org/pub/CPAN/
(7) ftp://mirror.uklinux.net/pub/CPAN/
(8) ftp://sunsite.doc.ic.ac.uk/packages/CPAN/
(9) ftp://usit.shef.ac.uk/pub/packages/CPAN/
Select as many URLs as you like,
put them on one line, separated by blanks [] 4 7 8

Enter another URL or RETURN to quit: []
New set of picks:
  ftp://ftp.flirble.org/pub/languages/perl/CPAN/
  ftp://mirror.uklinux.net/pub/CPAN/
  ftp://sunsite.doc.ic.ac.uk/packages/CPAN/

Eventually, you'll get to the CPAN tool's shell prompt, where you need to install a few modules - the tool will do all the work for you.

  • NOTE: You will need to have previously installed the Cygwin make and gcc packages, which are required by the CPAN installer (gcc is required for modules that include C language code) - you can install them now by launching Cygwin's setup.exe from c:/download/cygwin-dist (no need to exit the CPAN installer).

cpan shell -- CPAN exploration and modules installation (v1.59_54)
cpan> install Net::SMTP
May already be installed - if it is, try 'force install', since it's useful to be able to set
firewall and passive FTP configuration when using Net::FTP.  Make sure you answer 'Y' to the question 
about whether you want to configure this package.
cpan> install Digest::SHA1
Lots of output about how CPAN finds, builds and installs the module - watch for 
any errors, though it should work fine if you have installed the Cygwin packages listed above (particularly 'gcc' and 'make').
cpan> install MIME::Base64
May already be installed.

Re-locking RCS files

7. Re-locking files

First, some testing: in your browser, go to http://yourdomain.com/bin/testenv - this provides a lot of detail, including warnings. Write down the Apache server's userid that is given by this script - typically either 'system' or 'administrator' - I'll assume 'system' from now on.

  • If the testenv script doesn't work, go back and check the configuration of the Apache httpd.conf file, and TWiki.cfg. Have a look at the Apache error log, c:/apache/logs/error_log, and the TWiki error log, /twiki/data/log*.txt.

This 'system' user must own the locks on the RCS files, which are shipped with the lock held by 'nobody'. The reason this matters is that no revisions will be tracked by RCS unless the Apache userid matches that of the RCS file locks.

You can re-lock files using rcs -u and rcs -l, but it's a painfully manual process. Instead, just use Perl again to mass-edit all the RCS files, as follows:

  • NOTE: The 'NR <= 10' part of the Perl command ensures that it only operates on the first 10 lines, to avoid editing the body of RCS files for topics that happen to include the text 'nobody:' (like this one...)

$ cd /twiki/data

$ : Make a backup of all files
$ tar czvf all-files.tar.gz */*

$ : Test edit a single file to check your typing
$ perl -pi~~~ -e 'NR <= 10 && s/nobody:/system:/ ' Main/WebIndex.txt,v

$ diff Main/WebIndex.txt,v Main/WebIndex.txt,v~~~
5c5
<       system:1.2; strict;
---
>       nobody:1.2; strict;

$ : Now edit all the RCS files at once - use cursor-up to recall previous command
$ perl -pi~~~ -e 'NR <= 10 && s/nobody:/system:/ ' */*,v

$ : Check for any remaining files not edited
$ grep 'strict;$' */*,v | grep -v system

$ : Clean up - type this very carefully 
$ rm */*~~~

  • If something goes wrong: to restore your existing files from the backup, just type tar xzvf all-files.tar.gz and all your files, both .txt and .txt,v, will be back as they were before the edits.

You have now re-locked all the RCS files and are almost ready to start using TWiki!

Email setup

8. Email setup for notification and registration

You need to set the SMTPMAILHOST in TWikiPreferences to an SMTP email host that is reachable and currently working. Otherwise you'll get a confusing message from TWiki when registering new users or running mailnotify (for WebNotify), along the lines of:

   Software Error: Can't call method "mail" on an undefined value at ../lib/TWiki/Net.pm line 187.

There are other settings to be made in TWikiPreferences, e.g. the WIKIWEBMASTER and (probably) the SMTPSENDERHOST (normally your mail server or TWiki server). See the TWikiInstallationGuide for more details, what's listed here is just enough to let you run the basic tests.

Testing your TWiki installation

It is important to test your TWiki installation before you release it to other users or put any significant data into it.

Here are the main things to test:

  • testenv - use http://yourdomain.com/bin/testenv and check for warnings
  • Page viewing (view script) - click around a few pages and make sure the links are OK
  • RCS diffs (rdiff script) - click on the Diffs link and on the '>' links at bottom of page
  • Edit a page, and register as a new user - tests page creation, use of register script to create a new user entry in /twiki/data/.htpasswd (the Apache password file), ability to send email via Net::SMTP, and whether SMTPMAILHOST was set correctly in TWikiPreferences.
    • If you get a failure to register or send email, check the Apache error log, and that all CPAN modules were installed correctly in Step 6, Installing required Perl modules.
    • Try typing tail -30 /c/apache/logs/error_log to see last 30 errors from Apache
  • Edit a page - check revision increased and set to current date/time
  • Edit the same page using another browser or PC, logging in as a different user - check there's a lock message (which you can override) and no double lines
  • Check the Apache error_log file to see if there are any RCS errors so far
  • Index - tests whether ls and grep are working
  • Search - more tests for whether ls and grep are working
  • Attachments - tests access to /twiki/pub directory.
    • Try a binary attachment upload and check the number of bytes in the file has not changed - if it has, see the Install Cygwin section's note on the default text file type.
  • Check the Apache error_log file again

Troubleshooting

If anything doesn't work, go back and check the configuration of the Apache httpd.conf file, and TWiki.cfg. Have a look at the Apache error log, c:/apache/logs/error_log, and the TWiki error log, /twiki/data/log*.txt, and if necessary enable debugging on selected scripts (the commands are right at the top of each script) - the results go into /twiki/data/debug.txt. There is also a /twiki/data/warning.txt file that contains less serious messages.

See TWiki:Codev.TWikiPatches in case there are patches (i.e. specific code changes) for particular problems that may affect you (e.g. TWiki:Codev.ChangePasswordOnWin2K).

If you find that the Index feature doesn't work, or topic name searches fail, you should check you have set $egrepCmd and $fgrepCmd correctly, as mentioned above.

Permissions

TWiki:Codev.CygWin has several models for how it does security:

  • By default, it only implements the Unix 'write' and 'execute' permissions bits - the former is controlled by the Windows Read-Only attribute, while the latter is automatically assigned to files named *.exe or *.com, and to files whose first line is a shebang (i.e. #!/bin/something). This is what has been used for this cookbook.
  • You can enable the 'ntea' or 'ntsec' models, which will increase security but are also likely to introduce permission problems.

I have not had any problems with TWiki permissions on Windows, unlike Linux/Unix, which is probably because I'm using the default security model for Cygwin. If you use the other models, you may still be OK if you have local admin rights, and Apache is running as the SYSTEM user (which it uses if started as a service). If you do have trouble in this area, see the TWikiInstallationGuide's advice, some of which will apply to TWiki:Codev.CygWin, and log any issues in TWiki:Codev.WindowsInstallCookbookComments.

Next Steps

See the TWikiInstallationGuide for other setup. In particular, you'll probably want to refer to the section on basic authentication - remember to use c:/twiki type filenames (i.e. Windows format) since you are using Apache for Windows.

Improved authentication

You may want to investigate TWiki:Codev.WindowsInstallModNTLM, which describes how to add an Apache module so that TWiki:Codev.InternetExplorer users are automatically authenticated based on their Windows domain login - this avoids TWiki:Codev.GettingTheUsernameWrong and TWiki:Codev.ForgettingPasswords, which are usually very common among TWiki users.

Improved performance

See TWiki:Codev.WindowsModPerlInstallCookbook and TWiki:Codev.ModPerl for information on installing TWiki under Apache's mod_perl - this is somewhat more complex and follows a different model, so it's best to get some experience with TWiki, Apache and Perl first.

Format of filenames

In your TWiki on Windows installation, it's worth remembering that:

  • Apache configuration files (e.g. the .htaccess file and c:/apache/conf/httpd.conf) always use Windows format paths, with forward slashes, e.g. c:/twiki
  • The same is true for the first line of the TWiki Perl scripts (since this line is interpreted by Apache), e.g. c:/cygwin/bin/perl
  • All other lines in the Perl scripts use Unix format paths, e.g. /twiki (using Cygwin Perl as per this cookbook)
  • Depending on the Perl version used (Cygwin or TWiki:Codev.ActivePerl), the TWiki.cfg file uses a mixture of Unix and Cygwin format paths - stick to the format used in the installation step for TWiki.cfg
  • RCS always uses Unix format paths, e.g. /twiki

Credits

Material in this cookbook is heavily based on the enormous number of contributions in TWiki:Codev.TWikiOnWindowsArchive and related topics - too many people to thank, but have a look at the contributor list to TWiki:Codev.TWikiOnWindowsArchive to get an idea!

People who've tested or reviewed this document and provided valuable feedback include:


ALERT! Comments welcome at TWiki:Codev.WindowsInstallCookbookComments

-- PeterThoeny - 30 Jan 2003
to top


You are here: TWiki > WindowsInstallCookbook

to top

Copyright © 1999-2014 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding UAIWiki? Send feedback